Welcome › Forums › Questions › Yeasu G-650XL rotator

  • This topic has 1 reply, 2 voices, and was last updated 3 weeks ago by M0PWX.
Log In Register Lost Password
Viewing 1 reply thread
  • Author
    Posts
    • 31 March 2025 at 02:01 #1785
      David
      Participant

        Good morning from Thailand.
        I am an expat living in Thailand and my G-650XL rotator has stopped working.
        I cant afford to buy a new one so has anything got any ideas on how to get it running again.
        Things like voltages coming out of the controller box would be very helpful.
        Any advise at all would be most appreciated.
        Thanks,
        My Thai callsign is HS0ZQA.

      • 14 October 2025 at 23:38 #1789
        M0PWX
        Participant

          there is what appears to be a reasonable tear down / repair video https://www.youtube.com/watch?v=YbTHKrB7CfU

          seems there is a couple of common issues, teeth stripped from gears or a “butterfly” which is the main drive on the motor shaft slips due to a grub screw issue

          motor voltage seems to be 24v https://www.kur02.com.au/index.php?option=com_content&view=article&id=47&Itemid=128

          so that should be what comes out the back of the controller

          73
          Peter
          M0PWX
          (not pete M0PSX who runs the site)

      • Author
        Posts
      Log In Register Lost Password
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.